Random Clock Talks Volume 1

author AWCI   1 год. назад
788 views

11 Like   0 Dislike

Random Clock Talks Volume 5

Volume 5 of J.M. Huckabee's Random Clock Talks produced in 1990 in conjunction with AWCI. In this volume Mr. Huckabee provides a demonstration and discussion about drilling the arbor using Huck's "turning in a box" method and making a pivot. RE-pivoting, assembly of clock movements, and the watchmaker's lathe and accessories

Random Clock Talks Volume 8

The 8th video in the series Random Clock Talks. Making and fitting a replacement pinion for a clock wheel. Using the Milling Machine. Making rivets.

Random Clock Talks Vol 2

Random Clock Talks by J.M. Huckabee were produced in 1990 in conjunction with AWCI. In Volume 2 of the Random Clock Talks Mr. Huckabee provides a demonstration of various tools and lathes to make and fit a clock bushing including selecting and using saws, the bench pin, and making tools.

James A. Lea, The Village Clockmaker. Clock repair tutorial. #17 Part 1. Re-pivoting a bent arbor.

I have been repairing clocks for fifty years and would like to share some of the things I have learned over the years. With that in mind this will be a weekly video of the repair of what ever comes through the door of the shop. Over fifty years I have repaired a broad range of clocks from simple American mantle clocks to rare European automata clocks to early English table clocks so stay tuned and please subscribe, like and if you comment or have a questions, I will do my best to answer them. My web site address is www.jamesleaclocks.com.

Random Clock Talks Vol 16 - Hairsprings

In Volume 16, J.M. Huckabee presents an in-depth discussion about hairsprings and demonstrates how to vibrate a clock hairspring.

The first in a series of videos on clockmaking topics from J. M. Huckabee

Comments for video: