1 Like 4 Dislike
Find your local stockist - http://www.trend-uk.com/en/UK/stockist/stockist_list.php Like us on Facebook - https://www.facebook.com/TrendRoutingTechnology Follow us on Twitter - https://twitter.com/TrendRouting BBC's Young Carpenter of the Year shows us how quick and easy it is to set up the Trend Lock Jig.
hi I just wanted to share a quick trick i learned some years ago. its a pretty cool way of making plain doors look interesting just by making a jig around the door with some spacers and running a hand router with a ROUND base around it ,by incorperating blocks or templates you can get some cool designs and by using different profile router bits you can really get greative with designs. thank you for watching . steve
How to cut the perfect hinge in minutes. This is the perfect tutorial showing you how to cut in the perfect door hinge. We show you the tools to use and the correct technique to become a Pro in no time at all.
http://www.trend-uk.com Two part adjustable block portable template set designed for recessing hinges in wooden doors & frames with a router. Easy to use with minimal setting-up time, completing the job both accurately & quickly. Suitable for use on-site & in joinery shops to increase productivity with excellent results. Fully adjustable apertures for fire door requirements and renovation work. Idea for fitting a new door in an old frame with no need for marking out in the conventional way. Quick & simple to set-up as the hinge is used as the pattern. Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges. Use with a light duty plunge router with 1/4 inch collet. A long reach router cutter is required, 12mm diameter with 70mm overall length. For full information on this product go to http://www.trend-uk.com/product/H_JIG_C/
http://www.trend-uk.com The Combination Router Base is a retro fit, quick change, multi-functional router base designed to: Increase the overall versatility of the router. Improve the quality of finish of every routing pass. Reduce the possibility of error. Increase stability during routing. Increase the level of precision achieved. Save set up time between tasks. Save space on storing hand made jigs. The CRB has seven functions - an offset baseplate, router compass from 19mm to 224mm radius, adjustable trenching with a clamp guide with 40mm micro adjustment, adjustable anti-tilt support, adjustable mortising of timber from 50mm to 200mm width, adjustable false panel groove copier and also enhances the Varijig frame system as an anti-tilt device when used with routers that can accept Euro style guide bushes (a special guide bush ref GB40/B is required). The CRB will fit most routers with two 8mm, 10mm and 12mm fence rod holes at centres of 78mm to 130mm. An accessory quick fit edge trimming base is available for trimming lipping up to 16mm wide and 6mm projection, ref. CRB/TB. Larger circles can be accommodated by using ccessory extension rods ref. N/COMPASS/AEX to increase radius by 560mm. Design Reg. No. 3003693. For full information on this product go to http://www.trend-uk.com/product/CRB/
Variable speed control.
Hex collet nut allows easy cutter changes.
43 mm diameter collar removeable base for carving, die grinding and pillar drill fitment.
Tapped fixing holes for Trend standard guide bushes.
Separate dust spout fixing holes.
Adjustable twin rod side fence for guiding along a straight edge.
H/JIG/A Hinge Jig
It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
Used on-site & in joinery shops to increase productivity with excellent results.
Four apertures for fire door requirements.
No need for marking out in the conventional way.
Quick & simple to set-up as the hinge is used as the pattern.
Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
Can be used on both inside and outside doors.
Use with a light duty plunge router with 1/4 inch collet.
Long reach router cutter required, 12mm diameter with 70mm overall length.
Angled position slots to prevent creep.
Unibase may be needed.
T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.
C/CHISEL Corner Chisel
Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates.
Spring loaded high speed steel (HSS) anvil for a sharp cut and long life.
Light weight aluminium body design.
Can be used with the Trend Hinge Jig.
Can be resharpened.
TR12X1/4TC Flute Cutter
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
For housing, grooving and mortising.
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
PTFE coated, indicated by distinctive black colouring.
Can be used on hardwood & softwood, fibreboard, plywood and particle board.
Etched dimensions on extra long 40mm shanks.
1 x T4EK Router
1 x Trend Hinge Jig
1 x Trend Corner Chisel
1 x 1/4" Flute Cutter